VE-300 Veterinary Electrocardiograph User Manual
-22-
consumption during storage and transport, the capacity of battery may not be full. If the
symbol
and the hint information
“
BAT WEAK
”
are displayed, which means the
battery capacity is weak, please recharge the battery first.
Please refer to the maintenance section for how to recharge the battery. During
recharging the battery, VE-300 can be powered by mains supply.
WARNING
: Potential equalization conductor of the unit should be connected to
the potential equalization bus bar of the electrical installation when
necessary.
4.2 Loading/Replacing Record Paper
Two kinds of paper can be used as ECG record paper. One is Rolled thermal paper with 80mm
width, and the other is folded thermal paper with 80mm width.
Note:
When using folded thermal paper, the Paper Roller is unnecessary, and it can be
taken out.
When there is no record paper loaded or it reaches the end of record paper, warning message
“
Paper?
”
will be given on the screen. Under this circumstance, record paper should be loaded
or replaced immediately.
Loading/Replacing Process for Rolled thermal paper:
1)
Place fingers under the flange of the recorder casing, pull upwards directly to release
the casing;
2)
Take out the paper roller, and remove remain paper from the left of roller if necessary;
Paper Roller
Groove
Casing
Printer Platen
Paper Tray
Thermal Print Head
