DIGITAL ECU TUNER 3 – User Manual
Scales configuration
There is an option to connect different kinds of sensors, which represent voltage, pressure, temperature, AFR, etc.
to the analog inputs. Basic unit of the input signal measurement is voltage in Volts. However, it is easier to use
signals with the value expressed in units, which are measured by the signal (for example pressure in Bars).
And for this purpose, scales of the
analog inputs can be used. To find the
window with scale choices, choose
Setup
from the menu, and then
Scales
Configuration.
In this window, it is
possible to choose a proper scale for
every analog input. The choice is:
voltage scale, proportional percent scale (for example for TPS), pressure sensors (for example, MPX4250AP, GM
115kPa, Greedy 3Bar), temperature sensors, AFR (narrow band, Zytronix WBO, linear wide band sensor 10-20).
The chosen set of scales can be saved in a folder using the option
Save
. It is also possible to load a set of scales,
which will be automatically loaded at client start-up.
Page 36
www.ecumaster.com