Ectaco Partner V6, User Manual, Page: 97 / 159

Partner
®
v6 User's Manual
97
Scope Input
•
Select the Scope option on the Graphic Calculator menu.
•
Change the default values if needed.
Xmin, Xmax, Ymin, Ymax indicate the drawing limit. The
extension of the X-coordinate is from Xmin to Xmax . The
extension of the Y-coordinate is from Ymin to Ymax . Xinc
and Yinc represent the scale of the X-axis and the Y-axis,
respectively. Xstep is the drawing precision. It represents
the Y-value per an Xstep .
♦
Note: If (T) is selected as a Variable value on the Mode
Setup menu (see below), then Tmin , Tmax define the
variation limit. Tstep is the drawing precision. It represents
the X-value and the Y-value per a Tstep .
•
To close the window and return to the Graphic Calculator
section, touch or press ESC, or press ENTER with the
cursor on the last line.
Mode Setup
•
Select the Mode option on the Graphic Calculator .
•
To change the default value in one of the four options,
select this option, then check the alternative box in the
pop-up window. To save changes, touch
or press
ENTER.
•
To display setup prompts for all four options in
succession, select
All .
•
Customize you graph using the drawing Modes :
Angle : with Coordinates set to ARC_AXLE, choose an
angle measurement unit.
Variable : select a way in which a function is defined.