Ectaco Partner V6, User Manual, Page: 8 / 159

Partner
®
v6 User's Manual
8
In order to prevent an excessive discharge of batteries and
resulting loss of data in RAM, the voice recording, the
talking function, and communication channels will be
disabled. To restore full functionality of the device and to
avoid risk of user’s data loss, replace the complete set of
batteries as soon as possible. Do not mix old and new
batteries.
How to replace the batteries
•
Press the ON/OFF key to turn the unit off.
•
Remove the battery compartment cover by sliding it
away from the unit.
•
Remove the used batteries and replace them with new
ones.
•
Make sure to place the batteries according to the
polarity markings (+ -) inside the compartment.
•
Put back the battery compartment cover by sliding it
toward the unit. Make sure the cover sits in place
properly.
♦
Note: You have 2 minutes to replace the batteries without
risk of loosing data stored in RAM. Do not exceed the 2-
minute limit! Neither the manufacturer nor the dealer may
be held responsible for loss of user’s data (see International
Warranty , page Error! Bookmark not defined. ).
Refer to page 9 for instructions if an initialization message
appears on the screen after replacing the batteries.
♦
Note: Never try to remove batteries from the unit when the
power is on. This can seriously damage the device. If you
experience difficulty turning the unit off, press the RESET
button on the left-hand side of the keyboard (next to the Q
key) and reinstall the system. See page 9 for additional
information.
♦
Note: Partner
®
v6 is equipped with a jack for external
power supply.