Partner
®
v6
User's Manual
9
Use of an inappropriate external power supply may
cause failure of the unit and void the warranty.
The AC/DC adapter should provide 9V and min 300mA DC
current.
♦
Note:
Electronic communication consumes considerable
amount of energy. Try to always use an external power
supply while sending electronic messages.
Contact your dealer to order the compatible AC/DC adapter
or call +1 (800) 710-7920 within the continental US or +7
(812) 545-3838 in Russia.
Initialization
The initialization routine is started
•
when Partner
®
v6 is turned on for the first time
•
when you remove the batteries (e.g. when you need to
replace those)
for longer than 2 minutes
•
after the system has been reset with the RESET
button.
♦
Note:
The RESET button is located on the left-hand side of
the keyboard (next to the Q key). It can be accessed with
any thin object like a paper clip. Never use a needle or a pin
there since it can damage the unit.
Depending on the state of the system recovery resources,
either the prompt
Initialize System?
or the message
System is initialized!
appears.
In the former case, press ESC or touch
or
to abort
initialization and preserve user’s data and customization.
Summary of Contents for Partner V6
Page 159: ...Partner v6 User s Manual 159...