ECTACO
®
Partner
®
LUX2
User Manual
9
RESET
Re-initialize system. The
RESET
button is located on the back of
the device under the battery compartment cover.
Power Supply
ECTACO
®
Partner
®
LUX2 is powered by a special Li-Polymer rechargeable
battery. When the battery becomes low, a warning message will be displayed. To
restore full functionality of the device, recharge the battery as soon as possible.
The battery compartment is located on the back of the device and is covered with
a plastic cover.
To open the battery compartment, remove the battery
compartment cover by sliding it away from the device.
How to Recharge the Battery
Only a special charger may be used with your ECTACO
®
Partner
®
LUX2. Use of
an inappropriate external power supply may cause failure of the device and will
void the warranty.
Battery charging is performed via mini-USB port by using the AC/DC adapter or by
a computer with USB-cable. The specified port is located on the lateral face of the
device.
Note:
Charge the battery for at least 5 hours prior to the first use of the device.
When the battery is fully discharged, the device might not turn on even if you
connect it to the AC/DC adapter. You may need to charge the battery for 2 hours
before turning on the device.
Turning the Device on/off
To turn the device on, press the
key. You may need to hold the
key for
1
–3 seconds until the LED blinks in blue. If the screen remains blank, connect the
AC/DC adapter to your device via the mini-USB port. The red LED signal shows
that the battery is recharging.
The battery can also be recharged through the USB port on your computer using
the special
USB to mini-USB
cable.
Note:
Use of an inappropriate external power supply may cause failure of the
device and will void the warranty.
Tap the screen with the supplied pointing device called the stylus which, when not
in use, is conveniently kept in a special slot at the side of the device's back panel.
If the device is locked, drag a lock icon to unlock the screen (see
Screen lock
on
page 36).
To shut down the device, press and hold the
key for a few seconds and
then select
Power off
in the menu that appears.
To activate the
Sleep mode
, press and instantly release the
key.
