Ectaco Partner LUX2, User Manual

Page: 13 / 37

ECTACO
®
Partner
®
LUX2 User Manual
13

Connect ECTACO
®
C-Pen
®
to your device. Make sure the device is turned on.
Note: You can recharge the battery while using ECTACO
®
C-Pen
®
– just use a
special USB twin cable (available separately) to connect ECTACO
®
C-Pen
®
to the
device and power supply. The device is capable of working continuously, as long
as ECTACO
®
C­Pen
®
is connected to a power supply.
The C-Pen input is selected automatically when ECTACO
®
C-Pen
®
is plugged in.
You can configure it manually.

When in the Home Screen , press the key and then select System
settings in the menu that appears.

In the Settings section, select Language & input . Select C-Pen Core .

Change the Language and input settings as desired.
You are now ready to scan.

Start the application you want to scan text to.

Place the tip of ECTACO
®
C-Pen
®
before the first character of your text. The
leg with the touch trigger should be below the text line and the other leg above
the text line.

Keep the touch trigger pressed onto the surface and move ECTACO
®
C-Pen
®
over the line of text. You can move ECTACO
®
C-Pen
®
either left-to-right or
right-to-left over the text.

Lift your ECTACO
®
C-Pen
®
. The text will be transferred to the selected
application.

To reconfigure the input method, open the Notifications Panel (see page 14)
and select C-Pen .
Application Menu
The application menu contains items that apply to the current screen or to the
application you are currently using. This menu is available in most applications.

To activate the application menu, press the key.