ECTACO Partner
®
ES B-3
User Manual
9
•
Remove the MMC slot cover.
•
Push the MMC in slightly.
You will hear a click and the card will pop out.
•
Slide it out and snap the cover back on.
Initialization
The initialization routine is started:
•
when ECTACO Partner
®
ES B-3 is turned on for the first time;
•
when you remove the batteries (e.g. when replacing them) for longer than
five minutes;
•
after the system has been reset with the RESET button – see Soft Reset
and Hard Reset below.
Soft Reset
Occasionally, ECTACO Partner
®
ES B-3 may need to be reset to clear its memory.
In most cases, a soft reset is sufficient. The soft reset does not affect programs or
user data.
•
Tap
to go to the Main Menu.
•
Tap
to open the Launcher Menu.
•
Tap
Restart system
on the Launcher Menu.
•
In the
Ready for Restart
screen, tap
Restart now
.
♦
Note:
On completion of the reboot, you will be prompted to conduct the touch-
screen calibration, which configures the proper spacing and alignment of the
touch-sensitive screen elements (see page 12).
If the Launcher Menu is not accessible, use the blunt end of a paperclip to gently
press the RESET button located on the back of the device.
♦
Note:
The RESET button is located on the back of the device and can be
accessed with any thin object like a paper clip. Never use a needle or a pin
since it can damage the device.
Hard Reset
In the rare event that the data on the screen is corrupted, a program is not
responding properly, or you forgot your password, you will need to perform a hard
