ECTACO Partner
®
ES B-3
User Manual
8
•
Please insert ECTACO Partner
®
ES B-3 MultiMedia Card into the MMC slot
before you turn the device on.
♦
Note:
Always make sure the device is turned off before installing or removing
the MMC.
Never insert or remove the card when the device is on.
Use the
On/Off button to turn the device off.
Installing MMC
•
Put your thumb on the MMC slot cover and slide it off.
•
Slide the MMC into the compartment with the contacts facing up and the label
facing down. Push the card gently until it clicks into place.
•
Snap the cover back on.
•
Turn the device on.
The operating system and program files will be installed on your ECTACO Partner
®
ES B-3. This will take about 2.5 minutes. When the installation procedure is
completed and the screen is calibrated, the
Setup
application will be shown.
•
Set the desired preferences (see page 44 for details) and tap
Done
.
If the MMC is not installed, a brief tour will be shown.
♦
Note:
The tour appears only after the device is left without battery power for
more than five minutes or when a hard reset is performed.
•
Tap the introductory sentence in the language you want to view the tour.
•
To skip pages in the tour, tap anywhere on the screen.
•
Turn the device off and insert the MMC as described above.
Removing MMC
•
Turn the device off by using the On/Off button.