59
Video Off Method
Default: DPMS Support
This item defines how the video is powered down to save power. This
item is set to DPMS (Display Power Management Software) by default.
MODEM Use IRQ
Default: 3
If you want an incoming call on a modem to automatically resume the
system from a power-saving mode, use this item to specify the interrupt
request line (IRQ) that is used by the modem. You might have to
connect the fax/modem to the mainboard Wake On Modem connector
for this feature to work.
Soft-Off by PWRBTN
Default: Instant -Off
Under ACPI (Advanced Configuration and Power management
Interface) you can create a software power down. In a software power
down, the system can be resumed by Wake Up Alarms. This item lets
you install a software power down that is controlled by the normal
power button on your system. If the item is set to Instant-Off, then the
power button causes a software power down. If the item is set to Delay
4 Sec. then you have to hold the power button down for four seconds to
cause a software power down.
IRQ/Event Activity Detect
Scroll to IRQ/Event Activity Detect and press <Enter> to view the
following screen:
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
IRQ/Event Activity Detect
Item Help
VGA
OFF
LPT & COM
LPT/COM
HDD & FDD
ON
PCI Master
OFF
PowerOn by PCI Card
Disabled
Wake Up On LAN/Ring
Disabled
RTC Alarm Resume
Disabled
x Date (of Month)
0
x Resume Time (hh:mm:ss)
0 0 0
IRQs Activity Monitoring
Press Enter
Menu Level
↑
↓
→
←
: Move Enter : Select
+/-/PU/PD:Value:
F10: Save ESC: Exit F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults