48
AGP & P2P Bridge Control
Scroll to AGP & P2P Bridge Control and press <Enter> to view the
following screen:
CMOS Setup Utility – Copyright © 1984 – 2000 Award Software
AGP & P2P Bridge Control
Item Help
AGP Aperture Size
64M
AGP Mode
4X
AGP Driving Control
Auto
x AGP Driving Value
DA
AGP Fast Write
Disabled
AGP Master 1 WS Write
Disabled
AGP Master 1 WS Write
Disabled
Menu Level
↑
↓
→
←
: Move Enter : Select
+/-/PU/PD:Value:
F10: Save ESC: Exit F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
AGP Aperture Size
Default: 64 MB
This item defines the size of the aperture if you use an AGP graphics
adapter. It refers to a section of the PCI memory address range used
for graphics memory. We recommend that you leave this item at the
default value.
AGP Mode
Default: 4X
This item allows you to set the AGP speed at 1X, 2X, or 4X. Enabling
AGP-4X Mode can greatly improve the display speed. If your graphics
dis play card does not support this feature, you need to disable this item.
AGP Driving Control
Default: Auto
This item can be used to signal driving current on AGP cards to auto or
Manual. Some AGP cards need stronger than normal driving current in
order to operate. We recommend that you set this item to Auto by
default.
•
AGP Driving Value:
When the previous item AGP Driving
Control is set to Manual, you can use this item to set the AGP
current driving value.
AGP Fast Write
Default: Disabled
This item allows you to enable or disable the caching of display data for
the video memory of the processor. Enabling can greatly improve the
display speed. If your graphics display card does not support this
feature, you need to disable this item.