54
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
Super I/O Device
Item Help
POWER ON Function
Hot KEY
KB Power ON Password
Enter
Hot Key Power ON
Ctrl-F12
Onboard FDC Controller
Enabled
Onboard Serial Port 1
3F8/IRQ4
Onboard Serial Port 2
2F8/IRQ3
UART Mode Select
Normal
UR2 Duplex Mode
Half
Onboard Parallel Port
378/IRQ7
Parallel Port Mode
ECP
ECP Mode Use DMA
3
Game Port Address
201
Midi Port Address
330
Midi Port IRQ
10
Menu Level
↑
↓
→
←
: Move Enter : Select
+/-/PU/PD:Value:
F10: Save ESC: Exit F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
Power On Function
Default: Hot KEY
This system can be resumed from a software powerdown or a power -
saving mode by password, hot key, mouse activity, or keyboard activity.
Use these items to enable or disable these features.
KB Power ON Password
Default: Enter
Enables you to set a password when powering on the system with
keyboard activity.
Hot Key Power ON
Default: Ctrl-F12
Enables you to set a hot key combination to be used for powering on
the system.
Onboard FDC Controller
Default: Enabled
This option enables the onboard floppy disk drive controller.
Onboard Serial Port 1
Default: 3F8/IRQ4
Onboard Serial Port 2
Default: 2F8/IRQ3
These options are used to assign the I/O addresses and interrupt
requests (IRQs) for the two onboard serial ports.