2
Motherboard User’s Guide
Onboard IDE connector
•
One IDE connector that supports PIO (Programmable Input/Output)
and DMA (Direct Memory Access) modes
•
Supports IDE Ultra DMA bus mastering with transfer rates of 100/66/33
MB/sec
•
System Memory Controller Support
-Supports DDR2 SDRAM with up to maximum memory of 2 GB
•
PCI Express Graphics Interface Support
-One PCIEX16 slot for Graphic Interface
•
PCI Bus Interface
-Supports PCI Revision 2.3 Specification at 33 MHz
•
Integrated Serial ATA Host Controller
-Supports four ports with data transfer rate up to 3.0 Gb/s
•
Integrated IDE Controller
-Ultra ATA 100/66/33 Support
•
USB 2.0
-Integrated USB 2.0 Host Controller supporting up to eight USB 2.0
ports
rates
•
Low pin count for both host and devices
Serial ATA
•
Four Serial ATA Connectors
•
Transfer rate exceeding best ATA (~3.0 Gb/s) with scalability to higher
•
5.1 Channel High Definition Audio Codec
• All DACs support 192K/96K/48K/44.1KHz sample rate
• Software selectable 2.5V/3.75V VREFOUT
• Meets Microsoft WHQL/WLP 2.x audio requirements
• Direct Sound 3D
TM
compatible
Audio
Memory Support
•
Two DIMM sockets for
DDR2 667/533/400
DDR SDRAM with Dual-
channel architecture
•
Maximum installed memory is 2 GB
Expansion Slots
•
One PCIEX16 slot for Graphic Interface
•
Two 32-bit PCI v2.3 compliant slots
•
One 40-pin IDE connector that supports two IDE devices
•
One floppy disk drive interface
•
Four 7-pin SATA connectors