26
Motherboard User’s Guide
APIC Mode (Enabled)
This item allows you to enable or disable the APCI (Advanced Programmable Interrupt
Controller) mode. APIC provides symmetric multi-processing (SMP) for systems,
allowing support for up to 60 processors.
Boot Other Device (Enabled)
When enabled, the system searches all other possible locations for an operating system
if it fails to find one in the devices specified under the First, Second and Third boot
devices.
Security Check (System)
This item is set to enable or disable the security check.
Configure DRAM Timing (By SPD)
When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial
Presence Detect) is located on the memory modules, BIOS reads information coded in
SPD during system boot up.
DVMT Mode Select (DVMT Mode)
This item allows you to select the DVMT operating mode.
DVMT/Fixed Memory (128MB)
When set to Fixed Mode, the graphics driver will reserve a fixed portion of the system
memory as graphics memory. When set to DVMT Mode, the graphics chip will dy-
namically allocate system memory as graphics memory, according to system and
graphics requirements.
Press <Esc> to return to the main menu setting page.
Advanced Chipset Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Chipset Setup
Configure DRAM Timing
By SPD
DVMT Mode Select
DVMT Mode
DVMT/Fixed Memory
128MB
Share Memory Size
Enabled, 8MB
Help Item
Options
Manual
By SPD
mnlk
: Move
Enter : Select
+/-/: Value
F9: Optimized Defaults
ESC: Exit
F1: General Help
F10: Save and Exit