15
Chapter 2: Motherboard Installation
Connect the power connector from the power supply to the
ATX1
connector on
the motherboard. The
ATX12V1
is a +12V connector for CPU Vcore power.
Connect the auxiliary case power connector to the
ATX12V1
connector.
Connect the system cooling fan connector to
SYS_FAN
.
Connect the case speaker cable to
SPK1
.
Connect the case switches and indicator LEDs to the
F_PANEL1
header. Please
refer to the following list of the F_PANEL1 pin assignments.
Install the Motherboard
Install the motherboard in a system chassis (case). The board is a Micro ATX size
motherboard. You can install this motherboard in a Micro ATX case. Make sure
your case has an I/O cover plate matching the ports on this motherboard.
Install the motherboard in a case. Follow the case manufacturer’s instructions to
use the hardware and internal mounting points on the chassis.
Pin
Signal
Pin
Signal
1
HD)
2
FP PWR/SLP(+)
3
HD_LED_N(-)
4
FP PWR/SLP(-)
5
RESET_SW_N(-)
6
POWE)
7
RESE)
8
POWER_SW_N(-)
9
RSVD
10 KEY