ECS GF7050VT-M, Manual

Page: 7 / 64

1
Introducing the Motherboard
Chapter 1
Introducing the Motherboard
Introduction
Thank you for choosing the GF7050VT-M motherboard. This motherboard is a high
performance, enhanced function motherboard designed to support the LGA775 socket
Intel
®
Core™ 2 Duo processor for high-end business or personal desktop markets.
This motherboard is based on NVIDIA
®
MCP73V for best desktop platform solution.
MCP73V is a single-chip, highly integrated, high performance Hyper-Threading
peripheral controller, unmatched by any other single chip-device controller. This
motherboard supports up to 4 GB of system memory with
single channel DDR2 667/
533 (over spec up to 800) MHz . High resolution graphics via one PCI Express x16
slot, 8 USB 2.0 ports (four USB ports and two USB headers support additional four
USB ports) and SATA support with RAID function.
There is an advanced full set of I/O ports in the rear panel, including PS/2 mouse and
keyboard connectors, COM, VGA, 4 USB ports, one LAN port and audio jacks for
microphone, line-in, and line-out. This motherboard is designed in a Micro ATX
form factor using a four-layer printed circuit board and measures 244 mm x 224 mm.
To reach DDR2 800, please make sure that “System Clock Mode” in
“Frequency/Voltage Control” should be selected to “Unlinked” manually
since the Auto-run is DDR2 667.