ECS GF7050VT-M Page 56 Manual Download

Page: 56 / 64

NVIDIA RAID Configuration

From the Integrated Peripherals Window, globally set SATA Mode select to
RAID Mode (see Figure 1.2).

Press F10 to save the configuration and exit (F10 is the navigation key to

Installing the NVIDIA RAID Software Under Windows

This section describes how to run the setup application and install the RAID soft-
ware.

Start the nForce Setup program to open the NVIDIA Windows nForce
Drivers page.

Figure 1.3 nForce Driver Installation Window

save the current configuration and exit setup in BIOS setting).

The PC reboots.

Make sure that the “NVIDIA IDE Driver” is selected.

Select the modules that you want to install.

You must install the NVIDIA IDE driver in order to enable NVIDIA RAID.
If you do not install the NVIDIA IDE driver, NVIDIA RAID will not be
enabled.

Click Next and then follow the instructions.After the installation is com-
pleted, be sure to reboot the PC.

After the reboot, initialize the newly created array.

Summary of Contents for GF7050VT-M

































































Search results

Summary of Contents for GF7050VT-M

Reviews:

Related manuals for GF7050VT-M

Brands by name

Popular brands

ECS GF7050VT-M, Manual

Search results

Summary of Contents for GF7050VT-M

Reviews:

Related manuals for GF7050VT-M

Brands by name

Popular brands