ECS GeForce 6100PM-M2, Manual, Page: 50 / 70

44
Using BIOS
Power-On by Alarm (Disabled)
This item allows users to enable or disable the alarm to wake up the system. If set
to Enabled, users can specify the specific day of month and the exact time to power
up the system.
• Date of Month Alarm : Use this item to define the date of month when
using the RTC alarm to resume the system.
Resume by WOM/RING (Disabled)
An input signal on the serial Ring indicator (RI) line (in other words, and incoming
call on the modem) awakens the system from a soft off state.
Resume By USB (S3) (Disabled)
This item allows users to enable or disable the USB device Walk-up from S3 mode.
Resume By PS2 MS/KB(S3) (Disabled)
These items enable or disable you to allow mouse or keyboard activity to awaken
the system from power saving mode.
Power On After Power Fail (Off)
This item enables your computer to automatically restart or return to its last oper-
ating status.
• Time (hh:mm:ss) Alarm : Use this item to define the time when using
the RTC alarm to resume the system.
Press <Esc> to return to the main menu setting page.
PNP/PCI Configurations
These options configure how PnP (Plug and Play) and PCI expansion cards operate
in your system. Both the the ISA and PCI buses on the motherboard use system
IRQs (Interrup ReQuests) and DMAs (Direct Memory Access). You must set up the
IRQ and DMA assignments correctly through the PnP/PCI Configurations Setup
utility for the motherboard to work properly. Selecting PnP/PCI Configurations
on the main program screen displays this menu:
Phoenix-Award WorkstationBIOS CMOS Setup Utility
PnP/PCI Configurations
Init Display First [PCI Slot]
Item Help
Menu Level
F5:Previous Values F6: Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help