manualshive.com logo in svg

ECS GeForce 6100PM-M2, Manual, Page: 47 / 70

Share
Download
ECS GeForce 6100PM-M2 Manual Download Page 47

41

Using BIOS

USB 2.0 controller (Enabled)

Enable this item if want to use the USB 2.0.

    

Onboard Device Setup (Press Enter)

Scroll to this item and press <Enter> to view the following screen:

Phoenix-Award WorkstationBIOS CMOS Setup Utility

Onboard Device

      Item Help

Menu Level

USB 2.0 controller

[Enabled]

USB Memory Type

[SHADOW]

USB Keyboard Support

[Enabled]

USB Mouse Support

[Enabled]

USB Storage Support                                    [Enabled]
HD Audio

[Auto]

Onboard Lan

[Enabled]

Onboard Lan Boot ROM

[Disabled]

F5:Previous Values     F6: Fail-Safe Defaults                 F7:Optimized Defaults

: Move   Enter: Select   +/-/PU/PD:Value   F10:Save  ESC:Exit   F1: General Help

USB Mouse Support (Enabled)

Enable this item if you plan to use a mouse connected through the USB port in a
legacy operating system (such as DOS) that does not support Plug and Play.

USB Storage Support (Enabled)

Use this item to enable or disable the USB Storage function.

HD Audio(Auto)

Enables and disables the onboard audio chip. Disable this item if you are going to
install a PCI audio add-in card.

Onboard Lan (Enabled)

Enables or disables the Onboard Lan.

USB Memory Type (SHADOW)

This item indicates the USB memory type.

USB Keyboard Support (Enabled)

Enable this item if you plan to use a keyboard connected through the USB port in a
legacy operating system (such as DOS) that does not support Plug and Play.

Onboard Lan Boot ROM (Disabled)

This item enables or disables LAN Boot ROM.

Press <Esc> to return to the  Integrated Peripherals page.

Summary of Contents for GeForce 6100PM-M2







































































Reviews:

No comments