ECS GeForce 6100PM-M2, Manual, Page: 49 / 70

43
Using BIOS
Power Management Setup
This option lets you control system power management. The system has various
power-saving modes including powering down the hard disk, turning off the video,
suspending to RAM, and software power down that allows the system to be
automatically resumed by certain events.
Phoenix-Award WorkstationBIOS CMOS Setup Utility
Power Management Setup
Item Help
Menu Level
ACPI Suspend Type [S3]
Soft-Off by PBTN [Instant-Off]
HPET Support [Disabled]
Resume By PCI PME [Disabled]
Resume By WOM/RING [Disabled]
Resume By USB (S3) [Disabled]
Resume By PS2 MS(S3) [Disabled]
Resume By PS2 KB(S3) [Disabled]
Power-On by Alarm [Disabled]
Day of Month Alarm 0
Time (hh:mm:ss) Alarm 0 : 0 : 0
Power on After Power Fial [Off]
X
X
F5:Previous Values F6: Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
ACPI Suspend Type (S3)
Use this item to define how your system suspends. In the default, S3 (STR), the
suspend mode is a suspend to RAM, i.e., the system shuts down with the exception
of a refresh current to the system memory.
Soft-Off by PBTN (Instant-Off)
Under ACPI (Advanced Configuration and Power management Interface) you can
create a software power down. In a software power down, the system can be resumed
by Wake Up Alarms. This item lets you install a software power down that is con-
trolled by the power button on your system. If the item is set to Instant-Off, then the
power button causes a software power down. If the item is set to Delay 4 Sec. then
you have to hold the power button down for four seconds to cause a software power
down.
HPET Support (Disabled)
Resume by PCI PME (Disabled)
This system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI Modem
card or PCI LAN card. You must use an ATX power supply inorder to use this
feature. Use this item to do wake-up action if inserting the PCI card.
This item enables or disables HPET (High Precision Event Timer) support.