ECS GeForce 6100PM-M2, Manual, Page: 48 / 70

42
Using BIOS
SuperIO Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Phoenix-Award WorkstationBIOS CMOS Setup Utility
Super IO Device
Onboard FDC Controller (Enabled)
This option enables the onboard floppy disk drive controller.
Onboard Serial Port 1 (3F8/IRQ4)
This option is used to assign the I/O address and interrupt request (IRQ) for onboard
serial port 1.
Item Help
Menu Level
Onboard FDC Controller [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
ECP Mode Use DMA 3
Press <Esc> to return to the Integrated Peripherals page.
F5:Previous Values F6: Fail-Safe Defaults F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
x
Parallel Port Mode (SPP)
Use this item to select the parallel port mode. You can select Normal (Standard
Parallel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or
BPP (Bi-Directional Parallel Port).
Onboard Parallel Port (378/IRQ7)
This item enables or disables the onboard parallel port, and assigns a port address. The
Auto setting will detect the available address.
• ECP Mode Use DMA (3) :
When the onboard parallel port is set to ECP
mode, the parallel port can use DMA3/1.