ECS 761GXM-M2, Manual, Page: 54 / 58

48
48
9 Press <Q> again to exit this BIOS utility and the red message frame will
show. Press <Y> and <Enter> to save changes.
10 Once the array has been created, you will need to FDISK and format
the array as if it were a new single hard drive.
Creating a RAID 1 (Mirror) Array
SiS 965L/180 enables users to create Mirror arrays with 2 drives only.
To create a Mirror array, follow these steps:
1 Press <A> to start creating a RAID array.
2 Press <3> and <Enter> to select Mirror.
3 You will have two selections to create a RAID 1 array. The default
value is <1> . If you select <1>Auto Create , you can create a RAID 1
array faster and easier. The result after creating will be show on step
7 . Besides, you also can select <2>Manual Create , see following
steps.