ECS 761GXM-M2, Manual, Page: 37 / 58

31
Using BIOS
Advanced Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Advanced Setup
Share Memory 64 MB
Quick Boot Enabled
1st Boot Device Hard Drive
2nd Boot Device CD/DVD
3rd Boot Device Removable Dev.
Removable Drives Press Enter
Try Other Boot Device Yes
Bootup Num-Lock On
Boot to Os/2>64MB No
Apterture Size 128MB
Auto Detect DIMM/PCI C1K Enabled
Spread Spectrum Disabled
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Help Item
f
mnlk
: Move
F10: Save ESC: Exit
Enter : Select +/-/: Value
F9: Optimized Defaults F1: General Help
Share Memory (64MB)
This item lets you allocate a portion of the main memory for the onboard VGA
display application with several options.
Quick Boot (Enabled)
If you enable this item, the system starts up more quickly be elimination some of
the power on test routines.
1st Boot Device/2nd Boot Device/3rd Boot Device
Use these items to determine the device order the computer uses to look for an
operating system to load at start-up time.
Try Other Boot Device (Yes)
If you enable this item, the system will also search for other boot devices if it fails
to find an operating system from the first two locations.
BootUp Num-Lock (On)
This item determines if the Num Lock key is active or inactive at system start-up
time.
Boot to OS/2 > 64MB (No)
Enable this item if you are booting the OS/2 operating system and you have more
than 64MB of system memory installed.
Aperture Size (128MB)
This item defines the size of aperture if you use a graphic adapter.
Auto detect DIMM/PCI Clock (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI
slots.