AG114123 Rev. 2
45
6.
Repeat the same procedure for the other filter,
which is located on the opposite side of the pla-
tesetter.
Cleaning the Media Drive Rollers
Cleaning the rollers will cut down on the contaminants running
through the media system. Dirty rollers can cause contamination of
the media.
Front Media Roller Cleaning Procedure
Step 1. Open the pinch roller bar to open the rollers.
Step 2. Use the User Maintenance Menu to run the media rollers.
Step 3. Sparingly apply “Fantastik” (ECRM HB2456) to a clean, lint-free
wipe.
Step 4. As the rollers turn, gently wipe both the front and back rollers with
the cloth, being careful to not ‘catch’ the cloth in the rollers. Do
not touch the rollers with bare hands. The oils and dirt will con-
taminate the rollers.
Step 5. After wiping with “Fantastik,” sparingly apply isopropyl alcohol to a
clean, lint-free wipe.
Step 6. As the rollers turn, gently wipe both the front and back rollers with
the cloth, being careful to not ‘catch’ the cloth in the rollers. Do
not touch the rollers with bare hands. The oils and dirt will con-
taminate the rollers.
Rear Media Roller Cleaning Procedure
The rear media roller is not accessible to an operator. The next time
you have the system serviced, ask your service provider to clean the
rear roller.
Summary of Contents for Mako 8 CTP
Page 1: ...MAKO 8 CTP Operator Guide NEWS extra...
Page 34: ...28 AG114123 Rev 2...
Page 46: ...40 AG114123 Rev 2...