22
AG114123 Rev. 2
PLATE WIDTH
OPTIONS
9.92” to 33.023”
(252.0mm to 838.78 mm)
By picking a value, you set the plate width for test patterns.
PLATE LENGTH
OPTIONS
9.922” to 47.99”
(253.8 to 1209.0 mm)
By picking a value, you set the plate length for test patterns.
PLATE IS NOTCH REGISTERED
OPTIONS
YES or NO
Sets the alignment to be used for test patterns. Punched plates are
generally notch registered as opposed to edge registered.
NOTCH DEPTH
OPTIONS
0.00” to 1.00” (00.0mm to 25.4 mm)
By picking a value, you set the notch depth for test patterns.
DISTANCE FROM NOTCH TO LEADING EDGE
OPTIONS
2.125” to 36.57” (53.9mm to 928.9 mm)
This options specifies the distance from the leading edge of the plate
to the center of the notch that is closest to the leading edge. This
parameter is only for notch-registered plates.
HORIZONTAL MAGNIFICATION
LIMITS
85.00% to 110.00%
Sets the size of the image in the horizontal direction from 85% to
110% of nominal.
VERTICAL MAGNIFICATION
LIMITS
85.00% to 110.00%
Sets the size of the image in the vertical direction from 85% to
110% of nominal.
Summary of Contents for Mako 8 CTP
Page 1: ...MAKO 8 CTP Operator Guide NEWS extra...
Page 34: ...28 AG114123 Rev 2...
Page 46: ...40 AG114123 Rev 2...