26
WIReD WAll CONTROlleR
Table 6 7-Day Programming Options for CAHV
Item
Setting
values
Overview
To access: Press and hold PROGRAM and CLOCK buttons simultaneously for 3 seconds; use
arrow keys to select position; save selection and exit by repeating the button press.
Quick copy
— Hold FAN and PROGRAM buttons for 3 seconds to copy current day’s settings
to all other days.
Navigating through settings: Press PROGRAM to move to the next setting or CLOCK to
move to the previous setting; to change values, use the UP and DOWN keys; when value is
reached, move to the next setting using the PROGRAM or CLOCK button; values are stored
on exit from programming mode.
7-Da
y progr
amming
(use T
able
8, P
age
28 to record settings)
Day of week
Mon, Tue, Wed,
Thu, fri, Sat,
Sun
The louver is closed when the fan is off.
Period of day
Morning
Day
evening
night
The periods provide four time settings to
initiate a change in cooling/heating setpoints.
They allow adjustments for setback (such as
night setback, daytime setback and occupied
settings for residential applications). Set the
hour/minute for each time as well as the
cooling and heating setpoints below.
Hour
0–12 a
0–12 p
Set the time to begin the period.
Minute
0–59
Cooling
setpoint
55–90 f
The unit will default to this setpoint when set
to Cooling in pre-programmed run mode.
Heating
setpoint
55–90 f
The unit will default to this setpoint when set
to Heating in pre-programmed run mode.
Auto setpoint
55–90 f
The unit will default to this setpoint when set
to Auto in pre-programmed run mode. (The
unit will auto changeover between heating
and cooling.)