25
WIReD WAll CONTROlleR
Wired Wall Control Operation
Wired Controller button Selections
POWER
Press to turn unit on or off.
MODe
Press to toggle through operating modes — Cool, Dry, Fan, Heat or Auto Changeover
ClOCK
Normal operation — hold for 3 seconds to enter Set Time mode; hold again for 3 seconds to exit. In
programming mode — press to enter the previous selection
lOUVeR
Press to toggle motorized louver on or off. (See Note)
UP ARROW
Normal operation - press to increase the setpoint temperature. Configuration, Set Time or Programming modes -
press to increase the setting
DOWN ARROW
Normal operation — press to decrease the setpoint temperature. Configuration, Set Time or Programming mode
— press to decrease the setting
lefT ARROW
Press for the previous item selection
RIgHT ARROW
Press for the next item selection
fAN
Press to toggle between fan modes — High, Med, Low or Auto.
PROgRAM
Normal operation — Press to toggle between manual operation and Pre-programmed (7-day) run mode.
Configuration, Set Time or Programming mode
TIMeR
Press to toggle Timer mode on/off
TURbO
While in Heating or Cooling, press for 5s enters Turbo mode for 30m
MODe + PROgRAM
With unit in OFF mode — Press and hold for 5 seconds to enter Configuration mode; press and hold for 5 seconds
again to exit
P
ClOCK
Press and hold 3 seconds to enter 7-Day Programming mode; press and hold for 3 seconds again to exit
fAN + PROgRAM
With unit in 7-Day Programming mode — Press and hold 3 seconds to copy the settings for the selected day to all
other days
Display
Mode
COOL, DRY, FAN, HEAT, AUTO
figure 26 Wired Wall Control
