RECEIVING INFORMATION
Shipping damage MUST be reported to the carrier IMMEDIATELY.
Examine exterior.
Remove cover and examine compressor and piping for signs of damage.
Inspection
Check shipment against bill of lading.
Verify equipment received as ordered.
Verify unit:
• Unit size and type correct per submittal sheet and
job requirements?
•
Louver color correct, if special color specified?
• Voltage correct?
• Electric heat correct capacity, if used?
Inspect each component for damage. Concealed
damage
must
be reported to carrier within 15 days
of receipt of shipment.
Carrier must make proper notation on delivery
receipt of all damage identified and complete carrier
inspection report.
Purchaser must notify Manufacturer’s Service
department of all damage and is responsible for filing
any necessary claims with carrier.
Customer Service : (800) 228-9364
General Information
Installation shall be completed by qualified agency.
Retain
this manual for future reference.
Installer, review this manual to verify unit has been
installed correctly. Run unit for one complete cycle to
verify proper function.
To obtain technical service or warranty assistance
during or after installation, contact your local
representative.
When calling for assistance, please have following
information ready:
Model Number_________________________
Serial Number_________________________
Date of installation______________________
3
Made in USA
P/N 240010545, Rev. B [10/24/2014
]
