19
6. Troubleshooting
Problem
Possible Solution
Display is blank and keypad
does not function
.
Check power cord connections.
Check fuse (picture below). If fuse is blown,
replace it. If it blows a second time, STOP
and call Ecozone for assistance.
Display prompts "Ready" but
keypad does not function
.
Disconnect and reconnect power cord.
Wait for "Ready" prompt.
Press STOP button (red) on keypad.
Press hard RESET button (yellow)
on keypad.
Red light (fault indication) is
'ON' and the display indicates
one of the following fault
codes:
a.
"AL: Presso-Stat"
b.
"AL: Micro-Switch"
Make note of fault code indicated on the
display.
Disconnect power cord.
CALL ECOZONE service.
Display shows:
“
Needs Service
”
This notification will appear every 500 hours
of use.
Upon notification, please refer to Section 6
above, page 15.
Other
Call local ECOZONE distributor for technical
support.