18
g. Re-mount each Singlet on its leading screws – slide in parallel.
Be sure
to re-insert Singlets so that the 3 tubes are on the side facing you.
h. Re-attach the electrical connector to each Singlet
(purple circles below)
Be sure the connectors are dry.
i. Re-screw on the two nuts to each Singlet.
Step 3 Close black front grill panel (#26, picture above page 16)
a. Replace the front grill making sure the dust filter is on the inside of the unit.
Make sure the earth cable to the grill is completely inside the unit.
b. Re-screw the 6 screws around the frame of the panel.
Step 4 Replacing Ozone Filtering Unit (# 17).
a. Open all screws (at 3 locations) connecting the used Ozone Filtering Unit (#17).
b. Remove the used Ozone Filtering Unit and replace it by the new Unit.
c. Screw and tight all screws (at exactly all 3 locations) to re-connect the
new Ozone Filtering Unit inside the machine.
d. You may through the used Unit to the garbage.
