background image

11

REMOTE CONTROLLER

SPLIT AIR CONDITIONER

EADM

Push the TIMER ON button, the remote controller will show TIMER ON, the last set 

time for START operation and the signal "h" will be shown on the DIGITAL display 

area. You are now ready to readjust the TIMER ON to start the operation.

Push the TIMER ON button again to set the time you want to start the operation.

Push the TIMER OFF button, the remote controller will show TIMER OFF, the last set 

time for STOP operation and the signal "h" will be shown on the DIGITAL display 

area. You are now ready to reset the time to STOP operation.

Push the TIMER OFF button again to set the lime you want to & stop the operation.

After setting the TIMER, there will be a one-half second delay before the remote 

controller transmits the signal to the Air Conditioner. Then, after approximately 

another 2 seconds, the signal "h" disappears and the set temperature will re-appear 

on the digital display.

The setting time is relative time. That is the time set is based on the delay of the current 

time.

3.1

3.2

3.3

3.4

3.5

Be sure there are no obstacles between the remote controller and the receiver of 

indoor unit otherwise the air conditioner will not work.

Keep the Remote Controller away from any liquids.

Protect the remote controller from the high temperatures and exposure to radiation.

Keep the indoor receiver out of direct sunlight or the Air Conditioner may 

malfunction.

Keep Remote Controller away from EMI (Electro-Magnetic Interference) supplied by 

other household appliances.

1

2

3

4

5

WARNING

Change the TIMER

To change the TIMER ON/OFF time, just press the corresponding TIMER button 

and reset the time.

To cancel the TIMER ON/OFF setting, just adjust the TIMER time to 0:00.

NOTE

Summary of Contents for R51M/BGCE













Reviews: