9
REMOTE CONTROLLER
SPLIT AIR CONDITIONER
EADM
COOL / HEAT
(COOLING ONLY MODEL WITHOUT)
AND FAN OPERATION
1
2
3
4
If the AUTO mode is not comfortable, you may manually over-ride the settings by
using COOL, HEAT or FAN modes.
Push the TEMP button to set the desired room temperature. When in COOLING
mode, the most comfortable settings are 21º C / 69º F or above. When in HEATING
mode, the most comfortable settings are 28º C / 82º F or below.
Push the FAN SPEED to select the FAN mode of AUTO, HIGH, MED or LOW.
Push the ON/OFF button, the operation lamp lights and the air conditioner start to
operate as your settings. Push the ON/OFF button again to stop this unit operation.
DRY OPERATION
Push the MODE button to select DRY.
Push the TEMP button to set the desired temperature from 17º C to 30º C / 63º F
~ 86 º F.
Push the ON/OFF button, the OPERATION lamp lights and the air conditioner starts
to operate in DRY mode at LOW fan speed. Push the ON/OFF button again to stop
this unit operation.
Due to the difference of the set temperature of the unit and the actual indoor
temperature, the Air Conditioner when in DRY mode will automatically operate many
times without running the COOL end FAN mode.
1
2
3
The FAN mode cannot be used to control the temperature. While in this mode, only steps
1, 3 and 4 may be performed
.
NOTE
NOTE
Summary of Contents for R51M/BGCE
Page 12: ......
