6
SPLIT-TYPE ROOM AIR CONDITIONER
EDCM
TEMPERATURE
Room Temperature
Outdoor Temperature
MODE
COOLING
OPERATION
HEATING
OPERATION
DRYING
OPERATION
17 ºC ~ 32º C
(62º F~ 90º F)
0º C~ 30º C
(32ºF ~ 86º F)
10º C~32º C
(50º F~ 90º F )
0º C ~ 50º C
(32º F ~ 122º F)
0 ºC ~ 50 ºC
(32º F ~ 122 ºF)
(-15 ºC ~ 50 ºC
5º F ~ 122º F:
for models with low
temperature cooling
system)
-15 ºC ~ 30 ºC
(5º F ~ 86ºF)
This function is only available under COOL (AUTO COOL, FORCED
COOL) and DRY mode.
Before select the function, it is recommended to run the air
conditioner under Cooling operation for about half an hour.
Once the Self Clean function is activated, all TIMER setting will be
cancelled.
During Self Clean operation, when press the SELF CLEAN button on
the remote controller again will stop the operation and turn off the
unit automatically.
CLEAN AIR function (on some models)
This air conditioner is equipped with ionizer or Plasma Dust
Collector (Depending on specific configuration of the model).
With the anions generated by Ionizer, the air circulation of
the air conditioner fills the room with refreshing, natural and
healthy air. The Plasma Dust Collector generates a high voltage
ionization zone, through which the air is converted to plasma.
Inside the air most of the dust, smoke, and pollen particles are
captured by the electrostatic filter.
Anti-mildew function (Optional)
When turns off the unit on COOL, DRY, AUTO (Cool) mode, the
air conditioner will continue operating for about 7-10 minutes
(depending on models) at LOW fan speed. If turns off on HEAT
mode, the unit will continue operating for about 30 seconds at
LOW fan speed. This will help to dry up the condensed water
inside the evaporator, and prevent the breeding of mildew.
Under Anti-mildew operation, do not restart the air conditioner
until the unit is completely off.
Vertical swing function (Optional)
After the AC starts up, users can control the vertical louver
swing by the remote controller.
This manual does not include Remote Controller Operations, see the <<Remote
Controller Instruction>> packed with the unit for details.
Optimum performance will be achieved within these operating
temperatures. If air conditioner is used outside of the above
conditions, certain safety protection features
might come into operation and cause the unit to function
abnormally.
If the air conditioner runs for a long time in cooling mode and the
humidity is high(over 80%) , condensed water may drip out of the
unit. Please sets the vertical air flow louver to its maximum angle
(vertically to the floor), and set HIGH fan mode.
Suggestion:
For the unit adopts an Electric Heater, when the
outside ambient temperature is below 0OC(32OF), we strongly
recommend you to keep the machine plugged in order to
guarantee it running smoothly.
MANUAL OPERATION
OPERATING TEMPERATURE
Units are equipped with a switch to run emergency operation
mode. It can be accessed by opening the front panel. This switch
is used for manual operation in case the remote controller fails
to work or maintenance necessary.
The unit must be turned off before operating the manual control
button. If the unit is operational, continue pressing the manual
control button until the unit is off.
1
2
1
2
3
Open and lift the front panel up to an angle until it remains fixed
with a clicking sound. For some models, please use suspension bars
to prop up the panel.
One press of the manual control switch will lead to the forced AUTO
operation. If press the switch twice within five seconds, the unit will
operate under forced COOL operation.
Close the panel firmly to its original position.
CAUTIONS
This switch is used for testing purposes only. You had better not
choose it.
To restore the remote controller operation, use the remote
controller directly.
AUTO/COOL
AUTO/COOL
OPERATING INSTRUCTIONS
NOTES
NOTE
NOTE
NOTE
