12
11
https://www.altonindustries.com
>> Interrupt operation
Note: When the work break is long, it is
recommended to place the device on the
charging base to avoid damage to the water-
sensitive ground due to the dampness of the
roller brush.
Press the device switch to turn off the whole
machine, and place the device on the charging
base.
>> Turn off the washing
machine
Press the device switch to turn off the whole
machine, place the device on the charging
base,
and clean the device after the operation.
>> Equipment storage
In order to avoid the generation of odors, the
clean water tank and the dirty water tank must
be completely emptied when storing the
equipment.
Dry the wet roller brush. The wet roller brush
need to be dried and must not be placed in a
closed cabinet.
Store equipment in a dry room.
MAINTENANCE
>> Clean sewage tank
Cleaning the sewage tank To prevent dirt from
attaching to the water tank, the sewage tank
must be cleaned regularly.
Do not clean the sewage tank in the
dishwasher: if the sewage tank is deformed
due to the washing process, it will affect the
basic function.
Press the device switch to turn off the
machine, place the device on the charging
base, and remove the sewage tank from the
device, see chapter "Emptying the sewage
tank". and clean the recovery tank and cover
by tap water.
lf you do not need to continue to operate the
device, you also need to clean the roller brush,
see chapter "Cleaning the roller brush".
After cleaning, reload dusty tank assembly into
the equipment again.
>> Cleaning roller brush
Every time roller brush should be rinsed under
the tap after using. If you want to place the
equipment on the ground to remove roller
brush, the clean&dusty water tank must be
emptied.
This prevents liquid from spilling out
of the tank when the machine is placed on the
ground.
Press the power key to turn off the machine,
lay the machine flat on the ground, pull the
locking button backwards, the base cover
pops up, take out the roller brush and put the
roller brush under running water for cleaning,
water temperature should not be too high to
avoid damage to the roller brush bristles.
If the machine does not continue to be used,
roller brush should be placed in a cool place to
dry. Roller brush should not be placed in a
dryer to dry. It is also necessary to clean the
dusty tank.
TROUBLESHOOTING
Usually, the cause of failure is very simple, you
can troubleshoot it yourself by using following
overview.
In case of doubt or not listed here,
please contact the designated customer service
staff.
Charging plug/power plug is not properly
c o n n e c t e d - - - C o n n e c t t h e c h a r g i n g
plug/power plug correctly.
>> Device cannot be
charged
Li-battery is empty---Charge the device.
>> Device can not be
turned on
When the device is turned on, the first LED
light flashes and the device is not running---Li-
battery is empty, charge the device.
>> LED fault indicator
When the equipment is turned on, motor and
water pump do not work, the power indicator
lights and the water full indicator flashes---The
sewage water tank is full, clean it.
Overheating of equipment when in use (e.g.
Operating in a high temperature environment)-
--Pause and make it cool down. If the device
shuts down automatically for this purpose,
suspend use and make it cool down. Only
when the device has cooled down accordingly
can it be reconnected.
