>> Discharge process
When the body is tilted, the self-cleaning
switch fails, press the switch button, the
power indicator lights up, and the motor
(rolling brush) works;
Press the water spray
button, the water pump starts to work, the
indicator lights when it works, the water pump
must work when the switch button is turned
on, otherwise it is invalid.
When the body is upright, the switch and
water spray button are invalid. Press the self-
cleanings witch to light up the power indicator
and the pump working indicator. Motor works,
water pump works, charging function failure,
the water pump will automatically power off
after continuous operation for a period of time,
and the water pump indicator light goes out;
After 1 minute, the brush motor will
automatically power off and resume charging
function.
When the whole machine is turned on and
changed from tilt to upright state, the whole
machine is automatically powered off, the
motor and the pump stop working, and the
power indicator and the pump working
indicator are off.
During the self-cleaning
operation of the whole machine, when its
changed from upright to inclined, the whole
machine is automatically powered off, the
motor and the water pump stop working, and
the power indicator and the water pump
working indicator light go out.
When the local water full indicator starts
flashing, the motor and pump stop working, the
power indicator and pump indicator turn off;
When the water full indicator flashes, all the
functions of the whole machine are invalid.
>> Charging process
Insert the charging plug into the charging
base, then connect the power plug to the 100-
240V/50Hz-60Hz socket, the charging indicator
lights up and the whole machine starts to
charge.
The LED indicator shows the current charging
status of the lithium battery. When the
machine is empty, the first LED indicator starts
to blink. When the lithium battery capacity
reaches 1/3 , the first LED indicator is always
on, and the second LED indicator flashes;
when the lithium battery capacity reaches 2/3,
the first and second LED indicators are always
on , The third LED indicator starts to flash.
When the lithium battery is fully charged, the 3
LED indicators are always on.
In the charging state of the whole machine,
pressing the switch button will not work;
Under the charging state of the whole
machine, pressing the self-cleaning switch will
execute the discharge function 2 mode.
08
07
https://www.altonindustries.com
After charging, remove the power plug from
the socket and the charging cable from the
charging stand.
