ECOWATER
S Y S T E
M S
Faceplate Timer, Features/Options
19
The following is a description of the options in the Advanced/Service
Menu. To enter any of the following menus, press SELECT/EXIT (
¿
)
to enter Primary Menu. Move the cursor so that it is next to Advanced/
Service. Press the SELECT/EXIT (
¿
) button to enter this menu.
Warning screen will show, press the (
-
) button to continue.
Set Language:
Move cursor down to Set Language. Language can
be changed from English to Spanish or French.
Warning:
If the lan-
guage has been mistakenly changed, the following steps can be fol-
lowed to reset. When the timer is scrolling through Normal Screen
Views press the SELECT/EXIT (
¿
) button once to enter the Primary
Menu. Move cursor to the second to the last menu choice. Press SE-
LECT/EXIT (
¿
)
twice
to enter Advanced/Service Menu. Move cursor
down one line and press the SELECT/EXIT (
¿
) button to enter the
Set Language menu. Move cursor to desired language with English
first, Spanish second and French third. Press SELECT/EXIT (
¿
) to
exit to the Primary Menu.
Diagnostics:
Follow directions described before to get to Advanced/
Service Menu. Move cursor to Diagnostics and press SELECT/EXIT
(
¿
) to view this screen. This screen is for viewing only and will show
any error codes plus information about the unit. Use the (
-
) or (
¯
) but-
tons to view all lines of the screen. Press SELECT/EXIT (
¿
) to exit
to the Primary Menu.
Test Remote:
Follow directions described before to get to Advanced/
Service Menu. Move cursor to Test Remote and press SELECT/EXIT
(
¿
) to enter this menu. This screen is for first time setting up of the
remote. Use the (
-
) or (
¯
) buttons to change channel if necessary.
At set up, the unit will send a signal to the remote every 3 seconds to
allow for correct positioning of remote monitor. Press SELECT/EXIT
(
¿
) to exit to the Primary Menu. See pages 22 to 23 for Remote Moni-
tor.
continued
