4
Exhaust Air Heat Pump with CMEV
I. SPECIFICATION
MODEL
WEIGHT (KG)
DIMENSIONS (MM
)
POWER SUPPLY
EV-H20/180
83
620×1524
220V-240V/ 50Hz
EV-H20/270
94
620×1943
220V-240V/ 50Hz
II. APPEARANCE
III. FEATURES
ECOVOLT H20 EXHAUST AIR HOT WATER:
01. Quality built duplex stainless steel
water cylinder with 50mm factory
fitted rigid insulation. Lowstand
-
ing losses for energy efficiency in
the storage of hot water.
02. Quality highl
y efficiency micro
-channel heat exchanger wrapped
in close contact with the cylinder
for thermal conductivity.
03. No contact between the refriger-
ant piping and the water for addi-
tional safety
G E N E R A L I N F O R M AT I O N
DUPLEX SS TANK
180L & 270L
ErP A++
R290
REFRIGERANT
HIGHEST EFFICIENCY IN IT’S CLASS
COMPLIANT
04. The maximum outlet water tem-
perature is 70⁰C using a combina
-
tion of the heat pump and auxil-
iary heating element. For efficient
heating using the heat pump only
it is recommended that the hot wa-
ter temperature limit is set for 52⁰C.
05. The heat pump uses extracted
stale air from wet rooms delivered
by rigid or semi-rigid ducting and
connected using different meth-
ods as below. The air intake duct-
ing should be kept to a maximum
combined length of 20 meters.
For high performance buildings it
is recommended to install a sup-
ply duct connected to the outside
with an inline damper connected
to the damper signal cable. This
method will take energy from the
outside air as well as the internal
wet rooms.
06. Automatic and program modes
available.
