ECOVACS Winbot 7 series, Instruction Manual

Page: 18 / 60

8.
.
9.
10.
.
.
.
What happens if Winbot encounters Winbot is equipped with both audio and
curtains or blinds?
visual indicators should a problem occur.
For added convenience, there are two
Please make sure there is 4" clearance
visual Indicator Lights - one on each side
between the window and curtains so
of the unit - so if the Winbot is working
Winbot can move freely on the window.
outside the Indicator Light on the bottom
Blinds/shades must be pulled completely
of the unit can still be seen inside.
open. Outside windows should have 4"
clearance between window and any
If Winbot gets into trouble, sounds
outdoor plants or shrubs.
and/or flashes an alarm and stops,
cleaning, what should I do?
Can Winbot clean rounded glass or
glass that is mounted on an angle?
It is possible for Winbot to get into trouble
when cleaning. In most cases, it can get
Winbot is not intended for use on rounded
out of trouble on its own, but if that fails,
glass or glass that is mounted at an
the cleaning cycle will be stopped and an
angle. Do not use Winbot upside down.
alarm will indicate that assistance is
Can I use Winbot W710 on a frameless
necessary. Consult sections Meaning of
window?
Indicators and Alarms and Solutions
(section 8 and 9) in this Instruction
Winbot W710 can only be used on framed
Manual to determine what to do.
windows. Winbot W730 can be used on
both framed and frameless windows.
Can Winbot clean completely, even in
the corners of the window? What can I
Winbot didn
'
t clean the window
do if Winbot misses a spot?.
completely, or left streaks, what
happened?
Winbot is programmed to clean the
windows as completely and efficiently as
Winbot is NOT intended to replace
possible. However, in some
heavy duty or first time cleaning, this
circumstances, corners may not be
needs to be done by hand as you have
completely cleaned or a spot may be
done in the past. Winbot is designed
missed. Once the unit has finished its
for maintenance cleaning on standard
cleaning cycle, use the Remote Control
windows. Winbot can NOT be used to
to maneuver the Winbot it to the spots
clean stains such as paint, or windows
that need to be attended to using the
with stickers attached, as these may
ARROW buttons.
cause suction failure. For streaking,
reduced cleaning ability and other
Where can I purchase accessories,
issues, please refer to the Common
additional parts, or find a factory
Malfunctions section (section 10) in this
approved repair center?
Instruction Manual. The majority of these
Please contact Customer Service at 1-
issues can be avoided with regular
888-966-0895 or visit www.ecovacs.com.
maintenance detailed in the Product
to purchase additional parts and
Maintenance section (section 7).
accessories or find a factory approved
How should Winbot be stored when not
repair facility. Please have the model
in use?
number and product number that you
recorded on the Welcome Page of this
Place Winbot’s switch under the handle
manual available.
in the OFF position (far left) and clean the
unit as described in the Product
If you have questions or concerns that are
Maintenance section (section 7) in this
not addressed in this Manual, we welcome
Instruction Manual. Then store Winbot in
your questions and comments. Please
its original box a cool, dry place away
contact Customer Service 1-888-966-0895
from liquids and direct sunlight.
so that we may address any concerns you
may have.
When Winbot is cleaning an outside
window and the alarm goes off
Thank you for your purchase of the
indicating a problem, what happens if I
Winbot 7 Series. We hope you enjoy it
can’t hear it?
for years to come.
14
15
11.
16
12.
13
17
TM
EN