ECOVACS ROBOTICS WA50, Instruction Manual

Page: 18 / 152

18
EN
3. Maintenance
Cleaning Pad
a. Replace Cleaning Pad b. Clean the Cleaning Pad
Pause WINBOT. Remove the dirty cleaning pad and insert a new one
in the correct orientation.
Remove the Cleaning Pad from WINBOT. Immerse the Cleaning Pad
in lukewarm water for about 2 minutes, and rub a soft brush along the
grooves on the cleaning pad to remove dirt. Fold the Cleaning Pad
and squeeze it gently to remove excess water, and then place it in a
flat position to dry.
3. Maintenance
* The dark side of Cleaning Pad faces outwards. Make sure the side
with is attached to WINBOT Cleaning Pad Plate with the same .
* Do not squeeze the pad with excessive force or hang it up to dry as
it may cause it to lose its shape and impair its ability to absorb dirt.
* Do NOT use a damp Cleaning Pad on WINBOT. This helps to prevent
the robot from sliding out of position during use.
* If the Cleaning Pad becomes worn or no longer fits exactly within the
fastener area, replace it with a new one to achieve optimal cleaning
performance.