31
NOTICE:
When cleaning, use the wire brush lightly to avoid damaging or scratching
flame retardant element.
4. Check the flame retardant element and screen. Replace them if damaged.
5. Install flame retardant element and screen into locking cap, and then to
muffler, with clamp to tighten them.
6. Install exhaust cover, and tighten the screws on both sides.
AIR FILTER
1. Loosen screws and remove air intake cover.
① Screw
② Air intake cover
2. Loosen screw, remove air filter cover, and take
out filter element.
③ Screw
④ Air filter cover
⑤ Filter element
3. Wash the filter element in solvent and dry it.
4.
Add 5g engine oil to element, and squeeze out
excess oil.
The element should be wet, but not dripping.
Recommended filter oil:
Foam-air-filter oil or SAE#20 lubricant oil
