28
SPARK PLUG INSPECTION
1.
Remove spark plug cover and spark plug cap.
① Spark plug cover
② Spark plug cap
2.
Locate spark plug socket on spark plug, turn it clockwise with wrench, and
then disassemble spark plug.
③ Spark plug socket
④ Spark plug
3.
check for discoloration and remove the carbon.
Standard electrode color: Medium-to-light tan color
4.
Check spark plug type and clearance.
Standard spark plug: A5RTC (TORCH)
Spark plug clearance: a=0.6mm
5. Install spark plug.
Spark plug torque: 12~15N.m
6.
Install spark plug cover.
NOTE: When installing spark plug, twist it for 2-3
rounds by hand, and lock it up with specified torque value.
ENGINE OIL REPLACEMENT
WARNING:
Never drain engine oil immediately shut the engine to avoid scald.
1.
Place generator on a level surface, and start engine for several minutes to
reduce the engine oil viscosity. Then shut the engine, and turn the fuel tank
cap vent knob to position OFF.
