EPX-SERISE USER MANUAL Rev. G
10
X-RAY EQUIPMENT IS DANGEROUS TO BOTH PATIENT AND OPERATOR
UNLESS MEASURES OF PROTECTION ARE STRICTLY OBSERVED
4. SAFETY AND SPECIFICATIONS
4.1 SAFETY AND WARNING SYMBOLS
Never allow unqualified personnel to operate the X-ray
system.
High voltage symbol used to indicate the presence of
high voltage.
Warning symbol used to indicate a potential hazard to
operators, service personnel or to the equipment.. It
indicates a requirement to refer to the accompanying
documentation for details.
Radiation symbol used to indicate the presence of
radiation.
Laser radiation symbol used to indicate the presence of
laser beam.
HV 3 MINUTES WARNING LABEL
This label is attached on the main power board.
The DC link capacitor(approximately 325 VDC with line voltage
at 230VAC) will remain charged for up to 3 minutes after the AC
mains is disconnected or the AC switch is switched off.
