ECOTEST STORA-TU RKS-01, Operating Manual, Page: 88 / 132

86
If the connection failed to be established or data communications failed to be
performed with the PC (for instance, the PC is off, located beyond the reach of the
Bluetooth-interface of the radiometer, or the custom-made software is not launched
on this PC), the radiometer is searching for the PC with a Bluetooth name starting
with the “CHECKPOINT” symbols. If such PC is found, an attempt is made to
establish connection and perform data communications with the PC.
In case of a successful connection with the PC and data communications start,
the LCD of the radiometer displays a stripe (1) (Figure 27) “moving” across the
instantaneous value indicator.
During the data communications the radiometer sends to the PC the
measurement results that have been saved in the nonvolatile memory. During the
data communications you can also clear the measurement results saved in the
nonvolatile memory. After that the radiometer’s clock will be set according to the
PC clock.