INSTRUCTIONS MANUAL
-69-
STATIC DIAGNOSIS
(optional)
NOTE:
during STATIC DIAGNOSIS, it is not necessary connect the service hoses to the A/C
system
From the MANUAL PROCEDURE, select DEVICES:
Then select DIAGNOSIS, the following screen will be displayed:
Select STATIC DIAGNOSIS, the following screen will be displayed
select the A/C system type and press OK
NOTE:
Incorrect selection of A/C system type may falsify diagnostic results.
The following screen will be displayed:
Type in, in order, the minimum value of low pressure, the maximum and minimum value of high
pressure of the A/C system, and the temperature of the air at the outlet from the vents in the
passenger compartment (use the thermometer supplied with the machine to measure).
Then press OK to confirm, the following screen will be displayed:
R134a DEVICES
DYNAMIC DIAGNOSIS
STATIC DIAGNOSIS
R134a DEVICES
DIAGNOSYS
TYPE OF A/C SYSTEM:
THERMAL EXPANSION VALVE
ORIFICE TUBE
ORIFICE TUBE W.CONST.RUNN.COMP.
R134a DEVICES
STATIC DIAGNOSYS
Ta:
LP min
HP MAX:
HP min:
Tv min:
R134a DEVICES
STATIC DIAGNOSYS
