Ecosys P7035cdn, Operation Manual, Page: 31 / 256

Printing Operation 2-5
Accessing Command Center RX
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the
host name.
Examples: https://192.168.48.21/ (for IP address)
https://P001 (if the host name is "P001")
The web page displays basic information about the machine and
Command Center RX as well as their current status.
3
Select a category from the navigation bar on the left of the screen.
When you log in to the machine as an administrator, you will see
Device Settings , Function Settings , Network Settings , Security
Settings , and Management Settings .
Management
Settings Configure the advanced management settings.
Job Accounting , Authentication , Notification/Report ,
History Settings , SNMP , Reset
—
Setting Description
Administ-
rator General
User
Note
If the screen There is a problem with this website's
security certificate. is displayed, configure the certificate.
For details on Certificates, refer to the Command Center RX
User Guide .
You can also continue the operation without configuring the
certificate.