Ecosys P7035cdn, Operation Manual, Page: 136 / 256

4-64 Using the Operation Panel
Network (Network settings)
This printer supports TCP/IP and TCP/IP (IPv6) protocols.
IP is an abbreviation for Internet Protocol. This printer routinely uses the
TCP/IP (IPv4) protocol, but provides a separate setting for the next-
generation IP, IPv6.
TCP/IP (IPv4) uses 32-bit IP addresses, but the rapid growth in the
number of Internet users has resulted in a shortage of IP addresses. IPv6
was developed to expand the range of available IP addresses by using
128-bit IP addresses.
The options available in the Network settings are as follows:
• TCP/IP (Enable/Disable TCP/IP)
• IPv4 Setting (TCP/IP IPv4 settings)
• IPv6 Setting (TCP/IP IPv6 settings)
• Protocol Detail (Detailed settings for the network protocol)
• Restart Network (Restarting the network card)
1
Press [MENU] .
2
Press

or

to select
Network
.
3
Press [OK] . The Network menu appears showing a list of available
options.
4
Select
TCP/IP Settings
and press [OK] . The
TCP/IP Settings
menu screen appears.
Note
Check with your network administrator when selecting the
network setting. After all network related settings have been
done, restart the network. Refer to
Restart Network (Restarting
the network card) on page 4-72 . This is mandatory to make the
settings effective!
When Command Center RX is used, network parameters and
security settings can be conveniently changed and checked from
your PC. For more information, refer to the
Command Center RX
User Guide .
Network:
a b
1
TCP/IP Settings
2
Restart Network
[ Exit ]
TCP/IP Settings: a b
1 TCP/IP
2 IPv4 Setting
3 IPv6 Setting
[ Exit ]