Ecosys P7035cdn, Operation Manual, Page: 219 / 256

Troubleshooting 6-5
Error Messages
The following table lists errors and maintenance messages that you can
be dealt with by yourself. If
Machine failure. Call service.
appears, turn off the printer, disconnect the power cord, and contact your
service technician.
If
Machine failure. Call service.
or
Error occurred. Turn
the main power switch off and on.
is displayed, turn off the
printer then turn it back on to see if the printer has recovered. If the printer
has not recovered, turn off the printer, disconnect the power cord, and
contact your service representative or authorized service center.
Some errors cause the alarm to sound. To stop the alarm, press [Cancel] .
Message Corrective Action
This message is displayed when the Job Accounting function is enabled and an
attempt to specify job accounting settings or to register or delete an account
fails. To return the printer to the print-ready status, press
[OK] .
The paper has run out in the paper source displayed. Supply paper according to
the paper source displayed (paper cassettes, MP tray, or optional paper
feeders).This message is displayed alternately with messages indicating the
printer status, such as,
Ready to print.
,
Please wait.
, and
Processing.
.
F###
represents a controller error (#=
0
,
1
,
2
, ...). Call for service. The printer
does not operate when this message is displayed.
The printer controller and operation panel cannot exchange data. Turn the
printer off and unplug it from the mains power supply. Then contact your service
representative or authorized service center. See the back page of this manual
for the relevant phone numbers.
####
represents a mechanical error (#=
0
,
1
,
2
, ...). Call for service. The printer
does not operate when this message is displayed. The total number of pages
printed is also indicated, e.g.
0123456
.
Account error.
Press [OK].
##
Add paper in MP tray.
Machine failure.
Call service.
F###
Machine failure.
Call service.
F000
Machine failure.
Call service.
####