24
25
This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2014
ENG
REVERSE OSMOSIS SYSTEM INSTALLER AND USER GUIDE
6. USAGE
6.1. PARTS OF THE FILTER AND THEIR RECOMMENDED CHANGE OUT RATES
6.2. THE PROCEDURE FOR REPLACING PRE-FILTER CARTRIDGES
1.
Shut off feed valve
5
and tank valve
6
.
2.
Wash your hands with antibacterial soap.
3.
4.
5.
6.
7.
Unscrew with the sump wrench 10 first and second sumps in water flow
direction (right to left). Be careful as the sumps are filled with water.
Remove the used filter cartridges.
Wash sumps with unflavored soap and a clean sponge, then rinse
thoroughly with water.
Insert the new cartridges in the first and second sumps by water flow
direction.
Disconnect the tube stemming from the third sump from the auto
shut-off valve.
8.
Open the feed valve
5
and let through the first two installed cartridges 5-7 liters of water to rinse the coal dust that
may be produced in cartridges during shipping.
CAUTION! This water will pour through the tube disconnected from auto shut-off valve, prepare a vessel to
collect it.
Stage of filtration
Name of cartridge
Term for replacement
first
Pre-filter cartridges for reverse osmosis feed water
pre-treatment. Life of cartridges depends on quality
of supply water and daily consumption of purified
water.
second
third
fourth
Reverse osmosis membrane
Once a year
fifth
Carbon post-filter
sixth
Mineralizing post-filter/UV lamp
Summary of Contents for RO 5-100
Page 2: ...2...
