background image

engLisH

eDUCATe ALL USeRS

Manuals can be found on our website or by contacting your local 

distributor.

WHY ReGISTeR YOUR WARRANTY?

registering your warranty achieves more than simply activating your 

warranty - it provides our head office with the information that we 

require in order to communicate important safety and regulatory 

information to you should the need arise.

This could include things like:

•   Prompt notification in the unlikely event of a potential hazard,
•   Reminders about regular safety steps and maintenance procedures,
•   New model announcements or accessories that suit or enhance 

your purchase.

It is important that we are able to communicate effectively with our 

customers as part of our commitment to continual improvement, 

consumer safety and property protection.

If you purchased your product through an external distributor, retailer 

or agent. EcoSmart Inc does not have these details on file and may 

have trouble sourcing them as systems and best practices vary from 

business to business.

Please register your warranty today. You can do this online at  

www.ecosmartfire.com or by sending through your details as itemized 

on Page 19 via email to [email protected].

ecoSmart Inc

3641 Holdrege Avenue, Suite B 

LA 90016 USA

T + 1 (888) 590.3335  

E [email protected]

LISTING AND CODe APPROvALS   

A. Appliance Certification 

MODeL:  

ESF.1.B.G35, ESF.1.B.G28, ESF.1.B.G16

LABORATORY:   Underwriters Laboratories, Inc. (UL)
TYPe:  

decorative gas-Fired outdoor Fireplace

STANDARD:  

outdoor decorative gas appliances  

 

ANSI Z21.97-2014  

 

*CSA 2.41-2014

This appliance has been tested in accordance with ANSI Z21.97-2014 

and CSA 2.41-2014 for Canada and has been listed by Underwriters 

Laboratory (uL) for installation and operation as described in these 

installation and operating instructions.
The installation must conform with local codes or, in the absence of 

local codes, ANSI Z223.1 * NFPA 54 National fuel gas code – Natural 

gas and propane installation code, CSA B149.1 – or propane storage 

and handling code, CSA B149.2

The appliance, when installed, must be electrically grounded in 

accordance with local codes or, in the absence of local codes, with 

the National Electrical Code, ANSI/NFPA 70; or the Canadian Electrical 

Code, CSA C22.1, if applicable.

B. BTU Specifications

Model

Orifice Size

Max Input BTU

LP

NG

LP

NG

esF.1.B.g35

#43

#31

55331

51706

esF.1.B.g28

#43

#31

55331

51706

esF.1.B.g16

#43

#31

55331

51706

Summary of Contents for ESF.1.B.G16























Reviews: