COPYRIGHT © 2003 - 2004 ECOQUEST INTERNATIONAL. ALL RIGHTS RESERVED
FCC DECLARATION OF
CONFORMITY
Name:
EcoQuest
Model:
Fresh Air By EcoQuest
Manufacturer:
EcoQuest Manufacturing
This device complies with Part 18 of the
FCC Rules.
RESPONSIBLE PARTY
EcoQuest International
310 T. Elmer Cox Dr.
Greeneville, TN 37743
Ph: (800) 989-2299
Signature:
___________________________
Printed Name:
R. Paul Beam
Title:
Engineering Manager
Date:
7/9/04
Did you forget to register your Fresh Air
by EcoQuest?
By registering, you’ll activate your warranty,
and your privacy is guaranteed. Just fill out
your warranty card and drop it in the mail.
WARRANTY INFORMATION
This product is of solid state construction
and is warrantied by
EcoQuest International
310 T. Elmer Cox Drive
Greeneville, TN 37743
to the original purchaser, depending on
model, to be free from defect in materials
and workmanship for a limited time.
Length of warranty will vary depending on
model.
See warranty card for specific details.
If you have any questions concerning your
Fresh Air by EcoQuest, please see your
local EcoQuest Dealer.
For help, visit
www.EcoQuest.com
.
This equipment has been tested and found to comply with
the limits for Industrial, Scientific and Medical Equipment
(ISM), pursuant to Part 18 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause
harmful interference to radio or television, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
